Call Us Today! 615-457-8600
Nashville, TN

Digital Code

You’ve likely been told that today’s hearing aids are “not your father’s hearing aids,” or that hearing aid technology is light-years ahead of where it used to be, even as recently as 5 to 10 years ago. But what makes modern technology so much better? And what exactly can modern day hearing aids achieve that couldn’t be accomplished in the past?

The simple answer is, as with most electronics, hearing aids have benefited significantly from the digital revolution. Hearing aids have become miniaturized computers, with all of the programming versatility you would expect from a modern computer.

But before hearing aids became digital, they were analog. Let’s see if we can figure out why the move from analog to digital was such an improvement.

Digital vs analog hearing aids

At the most basic level, all hearing aids do the job the same way. Each hearing aid consists of a microphone, amplifier, speaker, and battery. The microphone picks up sound in the environment, the amplifier strengthens the signal, and the speaker supplies the louder sound to your ear.

Fundamentally, it’s not very complex. Where is does get complex, though, is in the particulars of how the hearing aids process sound, which digital hearing aids accomplish much differently than their analog alternatives.

Analog hearing aids process sound in a fairly straightforward way. In three basic steps, sound is recognized by the microphone, amplified, and delivered to the ear through the speaker. That is… ALL sound is made to be louder, including background noise and the sound frequencies you can already hear well. In other words, analog hearing aids amplify even the sounds you don’t want to hear — think of the scratching sound you hear from an analog recording on a vinyl record.

Digital hearing aids, in contrast, add a fourth step to the processing of sound: transformation of sound waves to digital information. Sound by itself is an analog signal, but instead of just making this analog signal louder, digital hearing aids first convert the sound into digital configuration (saved as 0s and 1s) that can then be manipulated. Digital hearing aids, therefore, can CHANGE the sound before amplification by changing the information stored as a series of 0s and 1s.

If this sounds like we’re talking about a computer, we are. Digital hearing aids are in essence miniature computers that run one customized program that manipulates and enhances the quality of sound.

Advantages of digital hearing aids

A large number of modern hearing aids are digital, and for good reason. Seeing that analog hearing aids can only amplify inbound sound, and cannot alter it, analog hearing aids have a tendency to amplify disruptive background noise, making it hard to hear in noisy environments and nearly impossible to talk on the phone.

Digital hearing aids, in contrast, have the flexibility to amplify specific sound frequencies. When sound is converted into a digital signal, the computer chip can identify, label, and store specific frequencies. For example, the higher frequency speech sounds can be labeled and stored separately from the lower frequency background noise. A hearing specialist can then program the computer chip to amplify only the high frequency speech sounds while suppressing the background noise — making it effortless to follow conversations even in noisy surroundings.

Here are some of the other advantages of digital hearing aids:

  • Miniaturized computer technology means smaller, more discreet hearing aids, with some models that fit entirely in the ear canal, making them nearly undetectable.
  • Digital hearing aids tend to have more appealing designs and colors.
  • Digital hearing aids can be programmed by a hearing specialist to process sound differently depending on the location. By changing settings, users can achieve ideal hearing for a range of situations, from a tranquil room to a noisy restaurant to talking on the phone.
  • Digital hearing aids can be fine-tuned for every patient. Each person hears different sound frequencies at different decibel levels. Digital hearing aids allow the hearing specialist to modify amplification for each sound frequency based on the characteristics of each person’s unique hearing loss.

Try digital hearing aids out for yourself

Reading about digital hearing aids is one thing, trying them out is another. But remember, to get the most out of any pair of hearing aids, you require both the technology and the programming mastery from an experienced, licensed hearing specialist.

And that’s where we come in. We’ve programmed and fine-tuned countless hearing aids for individuals with all types of hearing loss, and are more than happy to do the same for you. Give us a call and experience the digital advantage for yourself!